This fish feed production line is newly developed to meet the demand of intensive production of fish feed pellets.With many specifications this production line can produce floating fish feed, sinking fish feed etc. The products can have different shapes, unique flavor, rich
nutrients and fine texture to meet the different eating habit of fish.Super automation
control and high production efficiency, our fish feed production line is the best choice for
medium and big sized feed mills and breeding farms. Our fish feed production line can produce various kinds of pellets for different varieties of fishes including Halibut pellets, Catfish pellets, CatCarp pellet,Trout pellets,Hemp pellets, CSL pellets,etc.
Advantages of Fish / Shrimp / Crab / Aqua Feed Production Line
1. Advanced technology, high capacity and low energy consumption.
2. The feed pellet line occupies less floor space and needs low investment in construction work. The modular structure is convenient for assembly and disassembly, facilitating the
shipment and installation.
3. PLC controlled, alarm device is available. The operation is simple and convenient.
4. Wide applicable scope: The plant can produce both floating and slow-sinking fish feed, applicable for fish farm holders and fish feed manufacturers.
1.Material grinding---- feed hammer mill
Raw material ingredients should be grinded to the required size by feed grinder. We supply two types of feed grinders to meet your different requirements: SFSP668/SFSP999 feed
Hammer Mill is suitable for small or medium sized feed extruding factories; SFSP568/
SFSP998 feed Hammer mill is used for grinding raw materials by large and medium
livestock and aqua feed mills; SFSP668/SFSP999 hammer mill, also called Wide chamber
Fine feed Hammer Mill, is mainly applied to fine grinding of meals for special aqua feed.
2. Material mixing---feed mixer
Mixing the material thoroughly can ensure extruding efficiency and improve the feed quality. We supply two kinds of feed mixers for you to choose: double-shaft efficient mixer can be
applied to mixing powdery,granular, flaky and blocky materials while feed ribbon type mixer
is mostly used for mixing powdery materials.These two kinds of mixers can be customized
with atomizing spraying system which will add liquid like molasses and grease to material
3. Extruding process--- floating feed pellet extruder
Our fish feed pellet machine can be divided into two types: dry type fish feed machine and wet type feed machine. The wet type is with the conditioner and need to equip the steam
boiler. The dry type fish feed extruder is cheaper while the capacity of the wet type fish
feed extruder is higher, so usually the wet type fish feed extruder is suitable for large feed pellet factory and the dry type fish feed extruder is better and economic for the small and
medium size user or factory.
|Single-Screw Dry Extruder||SPHG100D||30||0.1-0.4|
|Double-screw Dry Extruder||SPHG65S||22||0.1-0.2|
|Single-screw Steam Extruder||SPHS135D||75/90/110||1-2|
|Double-screw Sream Extruder||SPHS65DS||22||0.15-0.3|
|Double-screw Sream Extruder||SPHS118S||90||0.8-2.0|
If you want make sinking fish feed only,you can also choose pellet mill.
The parameters of pellet mill:
|Aua Feed Pellet Mill(Double Jacket Conditioner)||Model||Power(kw)||Capacity(t/h)|
|Shrimp Feed Pellet Mill||Model||Output(t/h)||Main Power(kw)||Inner diameter of Die(mm)|
4.Pellets drying---feed pellet dryer
Our mesh belt dryer is a continuous convective belt dryer. Pellets formed through the extruder are stacked in layers on a wire mesh or perforated plate belt conveyor and
conveyed continuously through drying chambers. During this process, the drying air is passed repeatedly through the products layer until pellets have the optimum moisture content before leaving the dryer. While if you choose wet type fish feed machine, we recommend the gas type pellet dryer.
5. Pellet packing---electronic packing machine
To make the finished pellets easy to store, transport and catch the clients' eyes, they should be packed properly. With our electronic weighing and packing machine, the finished pellets
can be packed into bags,weighed, conveyed, and sealed automatically, which saves labor
and time greatly and meet the requirements of large scale production. For this packing machine, automatic heat typing code, automatic bag sewing and automatic thread cutting
can be optional functions.
Packing & Delivery
As a professional and experienced supplier of turn-key projects in China, we have the ability
to provide full services for customers:
1. Complete project design
2. Equipment manufacture and project engineering
3. Machinery delivery service to most of the locations in the world
4. Plant installation and commissioning service
5. Staff training and project managements
6. Spare parts supply and lifelong consultation service
7. Possible financial and banking services for some projects
8. Warranty:1 years
9. After the warranty period, the supplier promise to provide life-long service for customer, and provide the most preferential price of the required parts.
10. 24 hours online.We will reply your questions on time.